Maserati MC20 2023 - Pop-Up Messages

4
113
Instruments and Controls
United States Market
Canadian Market
Warning and indicator lights can be
accompanied by a pop-up message
according to the logic described in the
paragraph " Pop-ups Messages " of this
chapter.
For the meaning of the warning and
indicator lights see “Warning and
Indicator Lights” in this section.
Pop-up Messages
The pop-up messages on instrument
cluster are grouped in 4 different
classes:
• High priority warnings;
• Low priority warnings;
• Information;
• Feedback.
All messages of the above mentioned
classes are supported (if provided) by
a pop-up warning with dimensions
depending on the message length
accompanied by a software warning or
indicator lights placed in the predefined
position of the screen or light-up of
a hardware warning light in the side
sectors of the instrument cluster.
Warning Messages
When a failure occurs:
• the specific warning or indicator light (if
provided) on the screen turn on;
• simultaneously, the screen shows
the warning description (if provided)
and the relative icon or the software
warning or indicator light (if provided);
• an acoustic signal is provided (if
provided), synchronously with the
message visualization.
When a failure occurs, the information
on the screen is replaced by the failure
information.
In case of any warning that includes
the activation of a specific hardware
warning light on the side sector of the
instrument cluster, the relative message
and icon on the display is shown, (see
example in picture) following the logic
described below. At the end of the
visualization time, if the warning is still
present, the hardware warning light
remain active while the icon disappear
from the dedicated area on the display.
Priority Logic for Warning Messages
The failures are divided into two groups:
very serious (high priority) and less
serious (low priority) failures.
The visualization of the warning
messages is maintained for a long time
for the high priority messages and
for a shorter time for the low priority
messages.
The message is shown again, at every
key-on, until the relative malfunction is
solved.