Maserati MC20 2023 - Instrument Cluster Pop up Messages

4
119
Instruments and Controls
A long MENU button press stops the
chronometer: the current lap blinks for 2
seconds.
The user can resume the lap pressing
briefly the MENU button or reset the
chronometer with a long press of the
same button.
If the user resets the chronometer, all the
parameters shall be reset to “0” value.
With a short press of the MENU button,
user will start a new lap recording: with
a long press, the user can switch off the
chronometer function.
Chronometer Logic
The stopwatch will continue running
in the background even when another
menu screen is visualized. If not stopped,
after a maximum time the stopwatch will
stop and reset the data.
At each key off/key on, if the function
is active, the stopwatch visualization is
interrupted or stays paused if it was
paused. If user comes back to CORSA
mode, the chronometer shall not be
visualized. If the user presses the MENU
button, the instrument cluster will show
the chronometer with the last recorded
time values and paused current lap
recording.
Instrument Cluster Pop Up
Messages
Pop up position on instrument
cluster
For every Drive Mode Display
visualization, pop ups are always
displayed on the view area, in the right
part of the instrument cluster.
Even in the navigation full map view, pop
ups are displayed in the right part of the
instrument cluster.