3
91
Before Driving
MC20 Cielo
Before driving, place the mirror in
“MIRROR MODE” by moving the central
switch at the base of the mirror to the
vertical position.
When in "MIRROR MODE", it is possible
to manually adjust the position of the
mirror to correctly display the image
reproduced on it.
To activate the rear-view mirror in
"DISPLAY MODE", move the central
switch to the horizontal position, as
shown in the figure.
NOTE:
When using the rear-view mirror in
“DISPLAY MODE”, it is advisable to
direct the mirror in a proper direction to
avoid the reflection of natural light on
the display during projection.
When in "DISPLAY MODE", it is possible
to adjust the brightness and the camera
viewing angle by pressing :
1. button;
2. left and right adjustment buttons.
To adjust the display brightness, press
the button to select the icon.
Press left adjustment button to darken
or press the right adjustment button to
brighten.
To adjust the camera viewing angle
up or down, press the button until
the icon is selected. Press the left
adjustment button to move the image
downward or press the right adjustment
button to move the image upward.
External Mirrors
External mirrors can be adjusted
electrically.
The mirrors can be closed electrically
and will yield in both directions in case
of a collision.
The external mirrors are electrochromic,
which means, they automatically
operate an anti-dazzle function by
gradually shading as the light hitting
the mirrors increases. The external
rear-view electrochromic mirrors, work
in conjunction with the digital internal
rear-view mirror; this function can be
deactivated by operating on the MIA
screen (see "Functions of Controls Menu
on MIA" in section "Instruments and
Controls").
NOTE:
• The mirrors can be adjusted electrically
only with the ignition device in ON
position.
• When the vehicle is started, the
warning light shown in the picture will
momentarily illuminate in both outside
rear-view mirrors to let the driver know
that the BSA system is operational. For
(Continued)
To Next Page
Loading...
