Maserati MC20 2023 - Displayed Information

5
199
Starting and Driving
Controls
The controls are located on the left side
of the steering wheel with a specific
button to enable and disable the CC.
Control buttons have the following
functions:
Multifunction switch:
• ON/OFF button to en-
gage/disengage CC sys-
tem.
• Pushed (indication CANC)
deletes the set speed.
Multifunction switch:
• Press up (indication RES +):
increase speed, set current
speed or resume previously
set speed when system is
in "cancelled" status;
• Press down (indication
SET -): set speed/decrease
speed.
NOTE:
In order to ensure proper operation, the
CC system has been designed to shut
down if multiple systems are operated
at the same time (example: FCW). When
conditions so allow, the CC system
can be reactivated by pushing the CC
“ON/OFF” button and resetting the
desired vehicle set speed.
Displayed Information
Apart from the pop-up messages at the
center of the display, CC system status
is represented by icons in the dedicated
area, depending on the drive mode
selection activated, except in CORSA
and ESC OFF mode where this function
is not available. See "Instrument Cluster
Overview" in section "Instruments and
Controls".
Displayed information depends on
system status: ready, set, temporarily
canceled or override.
Activation
To turn the system on, push the
CANC button. The white light with
below 3 dashes on the cluster display
will illuminate.
To turn the system off, push the
CANC button a second time. The
white light will turn off.
NOTE:
The CC system must be turned off when
not in use.
WARNING!
Never leave the Cruise Control
system on when not in use. You could
accidentally set the system or cause it
to go faster than you want. Always
leave the system off when you are not
using it.
Speed Range of Use
Speed
MPH
(km/h)
Minimum 20 (30)
Engaged/activated 20 (30)