EasyManua.ls Logo

Maserati MC20 2023 - Page 199

Maserati MC20 2023
292 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
197
Starting and Driving
part for 5 seconds to advise the driver to
check the surrounding scenario before
any manoeuver.
With transmission in P (Park), N (Neutral)
or D (Drive) mode, the upper right corner
of the screen will show the "X" key:
touch it to go back to the previous
screen of MIA display.
The deactivation of the rear visualization
via "X" soft-key is not possible when the
transmission is in R (Reverse) mode.
Choose the most suitable view for the
situation and the manoeuver you are
performing or going to perform, by
touching the soft-key present on the left
side of the display: the edges of the
pressed button will highlight. The icon
will highlight and the type of selected
view will appear on each image.
In the top view, the vehicle is
represented as it is during the
manoeuver (see example in the figure).
To display also the dynamic lines of the
trajectory you are setting, it is necessary
to set this function by accessing the
"Settings" menu on "Vehicle" page of
MIA, at "Camera" item, by using the
dynamic gridlines activation menu. For
further information, see "Functions
of Settings Menu on MIA" in section
"Dashboard Instruments and Controls".
The following table shows the
approximate distances for each zone
and colour:
Zone
Distance to the rear of the
vehicle
Red 0 - 16 in (0 - 40 cm)
Yellow 16 - 39 in (40 cm - 1 m)
Green 39 - 118 in (1 - 3 m)
NOTE:
When any door that has a camera
mounted on it is ajar, the corresponding
area(s) of the top view will black out,
as the camera will be out of position.
When the rear hood (or liftgate) is
open, the rear portion of the top view
will black out, but the rear view will
remain displayed.
Top view stitched image shall be
blacked out when vehicle speed
exceeds image stitching initialization
threshold.
When a camera fail occurs, the proper
visualization and the top view will be
blackened out.
In fault conditions, when it is not
possible to change view, the soft-key
on the left of the display will be greyed
out.
When all the Surround View Camera
system is unavailable, a blue screen
appears to inform the driver of a loss of
communication with the radio.
WARNING!
Failure to follow the precautions below
might result in serious injury or even
death.
Drivers must be careful during
maneuvers also when using the
camera system with surround view.
Always check carefully the areas
around your vehicle, before proceeding
forward or backward.
Be sure to always check for any
pedestrians, animals, other vehicles,
obstructions, or blind spots.
The driver must use the utmost caution
while using the system to avoid
damage to property or personal injury.

Table of Contents

Related product manuals