4
141
Instruments and Controls
59. To select, touch the "+" or "–" soft-
keys as done for the hours.
• Time Format
When in this mode, you can select the
time format display. To change the
current setting, touch and release the
"12 Hrs" or "24 Hrs" soft-key.
• Show Time In Status Bar
This function will allow you to turn on
or shut off the digital clock in the upper
status bar.
• Set Date (in Cluster)
When in this mode, you can
set the date manually on the
instrument cluster display. You can
choose between three formats:
"Day/Month/Year", "Month/Day/Year"
or "Year/Month/Date". Touch the "+" or
"-" soft-keys to adjust the values.
Phone/Bluetooth
Touch this soft-key to select the function
related to the connect phones.
• Device Manager
By selecting this function, when touch
the "Phone" soft-key in the main
category bar the system open the
"Device Manager" page to manage the
connected devices.
• Do Not Disturb All
By selecting this function will block
incoming texts, calls or both.
• Enable Two Active Phones
By selecting this function the MIA
system enable two phones connected
via Bluetooth.
NOTE:
On the Maserati website, at
www.maserati.com, or through the
Authorized Maserati Dealer you may
consult the list of telephones that are
compatible with the MIA, and their level
of compatibility.
• Phone Pop-ups Displayed in Cluster
When this mode is selected a pop-up
message will appear in case of
incoming call. Information associated
to call in progress are available by
entering to the "Audio" menu using the
buttons on the steering wheel RH side.
Voice
After touching this soft-key the following
modes to give voice commands will be
available.
• Voice Options
It is possible choose between "Female"
or "Male" voice commands.
• Wake Up Word
With the microphones in the listening
mode, this function allows you to select
the wake up word from the available
options.
• Voice Barge-in
By selecting this function it is possible
to respond to a voice response before
the statement is completed.
• Show Command List
When this function is selected, it is
possible to select suggested options
during a voice control session.
Navigation
Touch this soft-key to set the following
modes.
• Show
• Map View
• Routing
• Sound & Alerts
• Other
Camera
Touch this soft-key to set the following
modes.
• ParkView Backup Camera Delay
By selecting this function, when the
transmission mode is moved out of R
(Reverse), the rear view image will be
displayed for up to 10 seconds after
shifting unless the forward vehicle
speed exceeds 8 MPH (12 km/h).
• ParkView Backup Camera Active
Guidelines
By selecting this function on the screen
of the surround camera are displayed
guidelines.
• Surround View Camera Delay
To Next Page
Loading...
