Maserati MC20 2023 - Page 160

4
158
Instruments and Controls
When the MIA system is in any category
other than “Comfort” (“Home”, “Media”,
“Phone”, etc.) the driver and passenger
temperature is always visible on the
upper status bar together with the front
seats comfort functions (if equipped).
Description of Controls
All described functions can be set and
modified using the soft-keys on the MIA
display.
When MIA is in any category other
than “Comfort”, pressing on driver or
passenger temperature and seat comfort
icon (if equipped) on the status bar a
small pop up will appear for 5 seconds
coming down from the main status bar.
1. Climate control on/off
Once you enter the screen “Climate”,
touch the “ON” soft-key to switch the
climate control ON.
The “OFF” soft-key will appear in place
of “ON” when the climate controls are
on. If the system has been turned off,
temperature values in the upper status
bar will be obscured in all MIA modes.
2. A/C
Touch the A/C soft-key to change the
current air conditioning setting; the soft-
key illuminates when the A/C is on. For
further details, see paragraph "Climate
Control Functions" in this chapter.
Temperatures can be set between 56 °F
(14 °C) and 88 °F (30 °C), if outside of
range LOW/ LO or HIGH/ HI will appear
in the display.
3. Driver's temperature control
Provides independent temperature
control. Touch the soft-key for cooler
temperature.
Touch the soft-key for warmer
temperature. The temperature setting
will be displayed on the upper status bar.
The temperature can also be adjusted
by touching and sliding the bar towards
soft-key , to increase temperature, or
towards soft-key to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar.
NOTE:
In “SYNC” mode, this control will also
automatically and simultaneously adjust
the passenger temperature.
4. Passenger temperature control
Provides the passenger with
independent temperature control.
Touch the soft-key for cooler
temperature. Touch the soft-key for
warmer temperature. The passenger's
temperature setting will be displayed on
the upper status bar.
The temperature can also be adjusted
by touching and sliding the bar towards
soft-key , to increase temperature, or
towards soft-key to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar as for the driver's side.
NOTE:
Adjusting passenger temperature while
in "SYNC" mode will automatically exit
"SYNC".