8
277
Technical Specifications
Parts to be refilled Quantity Product specifications
Braking system
0.21 Quarts/ 0.95 litres +/-
4%
Synthetic fluid: FMVSS 116 DOT 4, ISO 4925 Class 4, ENSAYOS
INTA-UNE 26-109-88, SAE J1703, SAE J1704, CUNA NC 956-01.
Recommended fluid: PETRONAS TOP EVO.
CAUTION!
To guarantee vehicle’s integrity and maintain performance level al-
ways use genuine parts approved and recommended by Maserati.
Air conditioning system
1.234 lb +/- 0.044 lb
560 g +/- 20 g
Refrigerant: R-1234 yf.
4.223 oz +/- 0.005 oz
120 ml +/- 0.15 ml
First equipment oil: PAG DENSO ND12 (1)
Lifter fluid 0.2 Quarts/ 0.9 litres First equipment oil: TUTELA CS SPEED (2)
(1) No change and/or topping up expected in scheduled maintenance.
(2) No change expected in scheduled maintenance.
Engine Oil Identification Symbol
This symbol means that the oil has been certified by the American Petroleum Institute (API). Maserati only recommends
API Certified engine oils.
CAUTION!
Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Damage caused by use of non-
approved chemicals is not covered by the new Vehicle Limited Warranty.
Engine Oil Viscosity (SAE Grade)
SAE 5W-40 engine oil is recommended for all operating temperatures. The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on engine oil filler cap location, see chapter “Maintenance Procedures” in
section “Maintenance and Care”.
Lubricants that do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used.
To Next Page
Loading...
