Masimo RAD-57C - About this Manual

Rad-57 Signal Extraction Pulse CO-Oximeter Operator’s Manual 1-1
1
overview
About this Manual
This manual explains how to set up and use the Rad-57c, Rad-57m and Rad-57cm Signal
Extraction Pulse CO-Oximeter. These three products will be generally referred to as the Rad-
57. Features and specifications apply to all models unless otherwise noted. Important safety
information relating to general use of the Rad-57 appears before this introduction. Other
important safety information is located throughout the manual where appropriate.
Read the entire safety information section before you operate the monitor.
In addition to the safety section, this manual includes the following sections:
SECTION 1 OVERVIEW gives a general description of Pulse CO-Oximetry.
SECTION 2 SYSTEM DESCRIPTION describes the Rad-57 system, functions and
features.
SECTION 3 SETUP describes how to setup the Rad-57 for use.
SECTION 4 OPERATION describes the operation of the Rad-57.
SECTION 5 ALARMS AND MESSAGES describes the alarm system messages.
SECTION 6 TROUBLESHOOTING gives troubleshooting information.
SECTION 7 SPECIFICATIONS gives the detailed specifications of the Rad-57.
SECTION 8 SENSORS AND PATIENT CABLES outlines how to use and care for
Masimo Rainbow SET, LNOP
®
, LNOPv™ and LNCS
®
sensors, Masimo
Rainbow SET patient cables and Masimo SET patient cables.
SECTION 9 SERVICE AND MAINTENANCE describes how to maintain, service and
obtain repair for the Rad-57.
SECTION 10 ACCESSORIES