Masimo RAD-57C - Introduction

Rad-57 Signal Extraction Pulse CO-Oximeter Operator’s Manual 2-1
2
Introduction
The Rad-57 is a full featured Pulse CO-Oximeter designed for ease of operation. All pulse
oximetry measurement information, as well as device status data, is displayed on the front
panel of the device. All user input is handled by control buttons on the front panel and the
sensor cable connection is located at the top edge of the device.
The Rad-57 is powered by 4 “AA” alkaline batteries, which provides a minimum of 8 hours
of battery life.
■ Rad-57 offers full Masimo Rainbow SET Technology in a small, hand held device.
■ Rad-57 supports the full line of Masimo sensors (see Section 8, sensors and
patient cables).
■ Provides 72 hours of trending memory
A Direct Connect Rainbow reusable sensor or patient cable or a Direct Connect Red
reusable sensor or patient cable attaches to the patient cable connector on the top of the
Rad-57. The Rad-57 can be used either as a transport monitor or as a handheld Pulse
CO-Oximeter for spot checks.
2
system description