Matrix Vision User Manual

Matrix
118
Vision System Manual
Delayed Hotline
After lifting the handset you do not get connected to the station immediately but get regular dial tone. If the
user does not dial anything during this short dial tone, the PBX places the hotline call to the station. This delay
timer allows the user to dial other numbers without cancelling hotline.
To Set Hotline Timer
1 Lift the handset. Dial tone
2
Dial
154-Seconds.
Confirmation tone
• The default value of hot line timer is 3 seconds and its range is 2-9 seconds.
• The hot line timer cannot be set to 0 or 1 second.
Cancel Hotline
1 Lift the handset. Dial tone
2
Dial
150.
Confirmation tone
• Please note that the cancellation code must be dialed from the PBX dial tone. If the Hotline timer is 1 second,
you have to be very quick in dialing the code.
How to program?
Hotline is a programmable feature. Please refer Class of Service (COS) for details on how to allow Hotline to a
user.
Important Point:
• Only one type of Hotline can be activated on the same station at the same time.
Relevant Topics:
1. Class of Service (COS) 70
2. Toll Control 184
=X=X=

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English