Matrix Vision User Manual

Vision System Manual
179
Matrix
System Parameters
What’s this?
Following options are desirable:
Load Default Configuration
Use following commands to load default configuration:
1103-Reverse SE Password
On giving this command all the programmable parameters of the system will be set to default values. However,
the timings of the voice message recorded in the system will not be set to default.
Default all Timers
Use following command to load default values of all timers:
1107-*-#
On giving this command all the timers of the system will set to default values.
=X=X=

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English