EasyManuals Logo

Matrix Vision User Manual

Matrix Vision
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
Vision System Manual
163
Matrix
Station Group
What’s this?
Station group is a group of stations. The destinations in this group can be used as destinations for incoming
call or destinations for door phone call or destinations for department call.
Department
Call
Trunk
Landing
Group
Station
Group
Door
Phone
A station group can be programmed as trunk landing group or as door phone group or as department group.
Same station group can also be assigned for all the three features viz. Trunk Landing, Department Call and
Door Phone.
How it works?
Maximum sixteen station groups can be formed.
Maximum 4 stations can be programmed in each station group.
The time for which each station rings can be programmed.
The sequence in which various stations in the group should ring can be arranged.
The number of stations that should ring at a time can be programmed.
Once a station receives a ring, it can be set to ring continuously till the call matures. Such a station
continues ringing even when other stations of the group are hunted. This is called “Continuous” ringing and
can be programmed for each station.
If the call is not answered even after hunting the last station, the system will loop back and start from the first
station once again till the ring from the exchange expires.
A fresh call can start hunting either from the first station of the group or from the station when the terminated
previous call. This method is called Rotation Method and can be set for each group. If rotation method is
enabled, the fresh call will land on the destination next to the one, which received the last call. This would
enable equal distribution of incoming calls to all the destinations within the group. If the rotation method is
disabled, the fresh call will always land on first station of the station group.
Any station can answer the call using call pick up feature.
Any station group can be programmed as Department group.
Any station group can be programmed as Doorphone group.
Any station group can be programmed as Trunk Landing Group.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix Vision and is the answer not in the manual?

Matrix Vision Specifications

General IconGeneral
BrandMatrix
ModelVision
CategoryPBX
LanguageEnglish

Related product manuals