Matrix Vision User Manual

Vision System Manual
123
Matrix
Last Number Redial
What’s this?
• This feature redials the last external number dialed, be it a station or an external number.
• This feature saves time during retrying a busy external number. It is same as REDIAL button of the telephone
instrument.
• This feature is also known as Last Number Redial (LNR).
How to use it?
1 Lift the handset. Dial tone
2
Dial
7.
Silence.
3 The System grabs a trunk. Trunk dial tone
4 The System inserts pause.
5 The System dials out the last number.
How to program?
Last Number Redial is a programmable feature. Please refer Class of Service (COS) for details on how to allow
last number Redial to a user.
Timer of Relevance:
Redial Wait Timer-It signifies the time for which the system waits once the user dials ‘7’. The Auto Redial code
is 77. Hence if user wants to try redial when he presses 7, the system waits for inter digit timer and then gives
confirmation tone. This timer can reduce the time. This timer can be reduced to 0 if Auto Redial is not used.
Command: 3034-Seconds
Default : 2 seconds.
Valid Range : 000 to 255 seconds.
Important Point:
• The system uses the same trunk access code you used for dialing the number last time.
=X=X=

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English