Vision System Manual
37
Matrix
Index Number
Trunk Access
Group
Alternate Number
Group
10 2640075 0 00
11 2640076 0 00
12 2640071 0 00
13 2635151 0 00
14 2635173 0 00
15 2788856 0 05
16 2788896 0 05
17 2788857 0 05
(If the global directory is not programmed then please program the global directory as explained in the topic
“
Abbreviated Dialing”)
Step 2
Use following command to program Alternate Group number:
1303-1-10-00
1303-1-11-00
1303-1-12-00
1303-1-13-00
1303-1-14-00
1303-1-15-05
1303-1-16-05
1303-1-17-05
Important Points:
• Alternate Numbers are used during Redial and Auto-redial. Hence all the timers related to these features
should be programmed properly.
• If Auto-Redial is set for a number having Alternate numbers, the system tries all the Alternate numbers first
and then sets the Auto-Redial for the last number dialed.
• One number can have one or more than one Alternate number. Maximum 90 alternate numbers can be
assigned to a number.
• Alternate number works even when abbreviated dialing is used. Suppose user dials 810 and if the dialed out
number is busy then on trying Redial system tries alternate number related alternate number related to 810.
• Alternate number is allowed to all the stations.
• Stations not having access to Global Directory can also use Alternate Number dialing.
Relevant Topics:
1. Abbreviated Dialing 25
2. Last Number Redial 123
3. Auto Redial 40
=X=X=
To Next Page
Need help?
General
