Matrix Vision - Page 50

Matrix
50
Vision System Manual
Step 3
Use following command to enable/disable CDC for Outgoing Call in a CDC table:
4910-1-CDC Table-Code
Where,
CDC Table is from 0 to 3.
Code Meaning
0 CDC for Outgoing call is to be disabled
1 CDC for Outgoing call is to be enabled
Use following command to enable/disable CDC for Outgoing Call in all CDC tables:
4910-*-Code
Use following command to enable/disable CDC for Incoming Call in a CDC table:
4911-1-CDC Table-Code
Where,
CDC Table is from 0 to 3.
Code Meaning
0 CDC for Incoming call is to be disabled
1 CDC for Incoming call is to be enabled
Use following command to enable/disable for Incoming Call in all CDC tables:
4911-*-Code
Use following command to enable/disable CDC for Internal Call in a CDC table:
4912-1-CDC Table-Code
Where,
CDC Table is from 0 to 3.
Code Meaning
0 CDC for Internal call is to be disabled
1 CDC for Internal call is to be enabled
Use following command to enable/disable for Internal Call in all CDC tables:
4912-*-Code
Use following command to assign disconnection flag:
4913-1-CDC Table-Disconnection Flag
Where,
CDC Table is from 0 to 3.
Disconnection Flag Mening
0 Call is not disconnected
1 Call is disconnected
Use following command to assign same disconnection flag to all CDC tables:
4913-*-Disconnection Flag
Use following command to assign CDC Timer:
4914-1-CDC Table-CDC Timer
Where,
CDC Table is from 0 to 3.
CDC Timer is from 000 to 999 seconds.