Matrox Solios eV-CL - Page 77

Board summary 77
Features specific to Matrox Solios eV-CLB and eV-CLBL in dual-Base
configuration
• Has two independent acquisition paths. Each supports a video source in the
Camera Link Base configuration.
• Can provide power over Camera Link (PoCL) with SafePower. The PoCL
protection on-board fuse can sustain a current of 0.4 A.
• Supports decoding the color information of a single-band, Bayer color-encoded
image. While decoding, the boards can also perform white balance correction.
• Has programmable LUTs that can be operated in the following configurations per
acquisition path
*
:
- 8 palettes of one, two, three, or four 256-entry 8-bit LUTs.
- 4 palettes of one or two 1024-entry 8- or 16-bit LUTs.
- 1 palette of one or two 4096-entry 8- or 16-bit LUTs.
• Instead of being mapped through a LUT, 14- and 16-bit data by-pass the LUTs.
Features specific to Matrox Solios eV-CLB and eV-CLBL in single-Medium
configuration and to Matrox Solios eV-CLF and eV-CLFL
• Has a single acquisition path. The board supports a single video source in the
Camera Link Medium or Full configuration.
• The programmable LUTs can be operated in the following configurations:
- 8 palettes of one, two, three, four, or eight 256-entry 8-bit LUTs.
- 4 palettes of one, two, three, or four 1024-entry 8- or 16-bit LUTs.
- 1 palette of one, two, three, or four 4096 entry 8- or 16-bit LUTs.
• Instead of being mapped through a LUT, 14- and 16-bit data by-pass the LUTs.
*. For example, two 1024-entry 8-bit LUTs can map 2-tap 10-bit data to 8-bit values. In
addition, one 1024-entry 8-bit LUT can map 1-tap 10-bit data to 8-bit values.