17
Calder Brothers Corp
V 1.0
Serial Number Range:
874-S-86TCX5Y2*03874 to _____________
Model: 1860 Paver
3.9 Pause/Resume
The paver is equipped with a pause/resume function.
Pause/resume functions similar to a vehicle cruise control.
While paving:
• Quickly toggle pause/resume switch to stop paver
drive and feed functions. Quickly toggle switch again
to resume drive and feed functions at the settings they
were at when paused.
• Toggle and hold switch to stop drive system only, feed
system is still operating. Toggle and hold switch again
to resume drive function.
3.10 Travel Speed
Select high or low on travel speed switch (1). Select low
speed for paving and machine loading. Select high speed
for traveling to and from work site. Engine rpm increases to
2200 rpm when high speed is selected.
If you toggle to high speed and idle/pave switch is in idle,
the engine will stay at idle and paver will move at a slightly
faster rate. If idle/pave switch is in pave and you toggle to
high speed, the engine speed will increase to 2200 rpm and
paver will move at a faster rate.
To Next Page
Loading...