Mauldin 1860 - Check Hydraulic Oil Level; 874-S-86 TCX5 Y2*03874 to; Verify Lights Are Operable; Check Horn and Signal Devices

36
Calder Brothers Corp
V 1.0
Model: 1860 Paver
SN:
Serial Number Range:
874-S-86TCX5Y2*03874 to _____________
6.3.4 Check Hydraulic Oil Level
1. Prepare paver for inspections and maintenance. See
Section 6.2 Prepare For Inspections And Maintenance.
2. Hydraulic oil level must be visible in sight gauge (1) with
engine stopped.
3. Add proper hydraulic oil if necessary.
6.3.5 Verify Lights Are Operable
Verify that all lights installed on paver are operational. Do not operate if any lights are not operational.
6.3.6 Check Horn And Signal Devices
Verify horn is operational. Both operator stations are equipped with a horn switch.
Check operation of the backup alarm.
6.3.7 Check Safety Decals
All safety decals are in place and legible. If the safety decal is no longer legible, replace it with a new one.
Contact your dealer for new decals.
6.3.8 Check Engine Radiator Intake Screen
1. Prepare paver for inspections and maintenance. See
Section 6.2 Prepare For Inspections And Maintenance.
2. Check engine radiator intake screen for dirt and debris.
Clean with low pressure compressed air or spray wash
if required.