Mauldin 1860 - Drain Fuel;Water Separator; Daily after Use; Clean Residue after Use; Wash Paver

37
Calder Brothers Corp
V 1.0
Serial Number Range:
874-S-86TCX5Y2*03874 to _____________
Model: 1860 Paver
6.3.9 Drain Fuel/Water Separator
1. Prepare paver for inspections and maintenance. See
Section 6.2 Prepare For Inspections And Maintenance.
2. Wear personal protective equipment appropriate for the
task.
3. Drain fuel/water separator (1) into a suitable container.
Dispose of fuel/water in an environmentally safe
manner.
6.4 Daily After Use
6.4.1 Clean Residue After Use
1. Prepare paver for inspections and maintenance. See Section 6.2 Prepare For Inspections And Maintenance.
2. Wear personal protective equipment appropriate for the task.
3. Clean conveyor, augers and screed at end of each days use with on-board wash system.
6.4.2 Wash Paver
1. Prepare paver for inspections and maintenance. See Section 6.2 Prepare For Inspections And Maintenance.
2. Wear personal protective equipment appropriate for the task.
3. Wash paver as necessary to remove dust and dirt.
6.5 After Initial 50 Hours
6.5.1 Change Hydraulic Filters
1. Prepare paver for inspections and maintenance. See
Section 6.2 Prepare For Inspections And Maintenance.
2. Wear personal protective equipment appropriate for the
task.
3. Place catch pan under lter.
4. Remove and replace spin on lter (1) and lter (2).
5. Check hydraulic oil level in sight glass (3). Add hydraulic
oil if necessary.
6. Dispose of hydraulic oil in an environmentally safe
manner.