Setup
Cabling
EPOS4 Disk 60/8 Hardware Reference
3-18 CCMC | 2021-10 | rel10276
3.2 Cabling
PLUG&PLAY
Take advantage of maxon’s prefab cable assemblies. They come as ready-to-use parts and will help to
reduce commissioning time to a minimum.
a) Check the following table and find the part number of the cable assembly that matches the
setup you will be using.
b) Follow the cross-reference to get the cable’s pin assignment.
Table 3-8 Prefab maxon cables
Connector
Prefab Cable Assembly
Designation
Part
Number
Page
X1/X2 Power & Motor Cable 696283 3-40
X3 Power & Motor Cable 696283 3-40
X4 Hall Sensor Cable 696284 3-40
X5 Encoder Cable 696285 3-41
X6 Sensor Cable 3x2core 696286 3-41
X7 Signal Cable 8core 696287 3-41
X8 Signal Cable 7core 696288 3-42
X13 USB Type A-Micro-Lock Cable 696289 3-42
X14
X15
CAN-CAN Cable
CAN-COM Cable
710931
710932
3-42
3-43
X14
X15
EtherCAT-EtherCAT Cable
EtherCAT-COM Cable
710933
710934
3-43
3-44
X16 Brake Cable 710928 3-44
To Next Page
Loading...