Maxon EPOS4 Disk 60/8 - Table 3-63 DIP Switch SW1 - Examples

Setup
DIP Switch Configuration (SW1)
EPOS4 Disk 60/8 Hardware Reference
3-46 CCMC | 2021-10 | rel10276
The set ID can be observed by adding the valence of all activated switches. Use the following table as a
(non-concluding) guide:
Table 3-63 DIP switch SW1 – Examples
Setting
Switch Solder pad
ID
1 2 3 4 JP301 JP302
0 0 0 0 0 0 –
1 0 0 0 0 0 1
0 1 0 0 0 0 2
0 0 1 0 0 0 4
1 0 1 0 0 0 5
0 0 0 1 0 0 8
0 0 0 0 1 0 16
0 1 1 1 0 1 30
0 1 1 0 1 1 54
1 1 1 1 1 1 63
0 = Switch “OFF” / solder pad “open” 1 = Switch “ON” / solder pad “shorted”
JP301
closed
JP302
closed
JP301
JP302
closed
JP301
JP302
closed