Maxon EPOS4 Disk 60/8 - Table 3-34 Digital Output 1 & 2 Specification - Source; Table 3-33 Digital Output 1 & 2 Specification - Sinks; Figure 3-22 Digout1 Source (Analogously Valid for Digout2); Figure 3-21 Digout1 Sinks (Analogously Valid for Digout2)

Setup
Connections
EPOS4 Disk 60/8 Hardware Reference
3-32 CCMC | 2021-10 | rel10276
WIRING EXAMPLES
Table 3-33 Digital output 1 & 2 specification – Sinks
Figure 3-21 DigOUT1 “sinks” (analogously valid for DigOUT2)
Table 3-34 Digital output 1 & 2 specification – Source
Figure 3-22 DigOUT1 “source” (analogously valid for DigOUT2)
Digital output 1 & 2 “sinks”
Max. input voltage 36 VDC
Max. load current 500 mA
Max. voltage drop 0.5 V @ 500 mA
Max. load inductance 100 mH @ 24 VDC; 500 mA
Digital output 1 & 2 “source”
Output voltage UOut = 5.45 V − 0.75 V − (ILoad x 2200 Ω)
Max. load current ILoad ≤2mA