Maxon EPOS4 Disk 60/8 - CAN Automatic Bit Rate Detection; CAN Bus Termination; Table 3-64 DIP Switch SW1 - CAN Automatic Bit Rate Detection; Table 3-65 DIP Switch SW1 - CAN Bus Termination

Setup
DIP Switch Configuration (SW1)
EPOS4 Disk 60/8 Hardware Reference
CCMC | 2021-10 | rel10276
3-47
3.5.2 CAN automatic Bit Rate Detection
Table 3-64 DIP switch SW1 – CAN automatic bit rate detection
3.5.3 CAN Bus Termination
Table 3-65 DIP switch SW1 – CAN bus termination
Switch OFF ON
5
Automatic bit rate detection deactivated
(factory setting, default 1 Mbit/s)
Automatic bit rate detection activated
Switch OFF ON
6
Without bus termination
(factory setting)
Bus termination with 120 Ω