Setup
Cabling
EPOS4 Disk 60/8 Hardware Reference
CCMC | 2021-10 | rel10276
3-19
MAKE&BAKE YOUR OWN
If you decide not to employ maxon’s prefab cable assemblies, you might wish to use the prepackaged kit. It
contains the connectors required to make up your own cabling (connectors for CAN/EtherCAT communi-
cation not included, for details see Table 3-43 and Table 3-46).
And you also can make use of matching plugs to connect to your network bus (Table 3-10).
Table 3-9 EPOS4 Disk Connector Set – Content
Table 3-10 EPOS4 Disk Communication Plugs
TOOLS
Table 3-11 Recommended tools
EPOS4 Disk Connector Set (710926)
Connector Specification Quantity
Connectors
X1, X2 Molex Mini-Fit Jr., dual row, 2 poles (3901-2025) 2
X1/X2, X3 Molex Micro-Fit 3.0, single row, 3 poles (43645-0300) 2
X3 Molex Mini-Fit Jr., dual row, 4 poles (3901-2045) 1
X4 Molex Micro-Lock Plus, single row, 3 poles (505565-0501) 1
X5 Molex Micro-Lock Plus, dual row, 8 poles (505432-0801) 1
X6 Molex Micro-Lock Plus, single row, 6 poles (505565-0601) 1
X7 Molex Micro-Lock Plus, single row, 8 poles (505565-0801) 1
X8 Molex Micro-Lock Plus, single row, 7 poles (505565-0701) 1
X13 Molex Micro-Lock Plus, single row, 4 poles (505565-0401) 1
X16 Molex Micro-Fit 3.0, single row, 2 poles (43645-0200) 1
Crimp Terminals
X1, X2, X3 Molex Mini-Fit Plus HCS, AWG16 (45750-3111) 8
X1/X2, X3, X16 Molex Micro-Fit 3.0 female crimp terminal (43030-0010) 8
X4, X5, X6, X7, X8,
X13
Molex Micro-Lock Plus female crimp terminal (505431-1000) 40
EPOS4 Disk Communication Plugs
Connector Bus Specification Part number
Suitable plug for
connector X14/X15
CAN CAN ix Industrial Type B plug 751388
EtherCAT EtherCAT ix Industrial Type A plug 748166
Tool Manufacturer Part number
Hand crimper for ix Industrial HARTING 09 45 800 0181
Hand crimper for Micro-Fit crimp terminals AWG18 Molex 63828-0200
Hand crimper for Micro-Fit crimp terminals AWG20…AGW30 Molex 63819-0000
Hand crimper for Micro-Lock crimp terminals Molex 63827-6900
To Next Page
Loading...