11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
24
STEP 3 - ATTACH OPTIONAL BATTERY BOX & FRAME
TO VEHICLE (IF EQUIPPED)
1. Liftgate and optional
battery box are typically
installed on trailers as
shown in FIG. 24-1 and
on trucks as shown in
FIG. 24-2. See the fol-
lowing page for battery
and cable connections.
LIFTGATE
OPTIONAL
BATTERY BOX,
TYPICAL LOCATION
RECOMMENDED LIFTGATE & OPTIONAL BATTERY BOX
INSTALLATION ON TRAILER
FIG. 24-1
CIRCUIT
BREAKER
175 AMP
FUSED CABLE
TRACTOR BATTERIES,
TYPICAL LOCATION
LIFTGATE
LIFTGATE
POWER UNIT
RECOMMENDED LIFTGATE & BATTERY BOX
INSTALLATION ON TRUCK
FIG. 24-2
CIRCUIT
BREAKER
RECOMMENDED CONFIGURATION
NOTE: Make sure the Liftgate power unit, and all batteries on the vehicle for the
power unit, are connected correctly to a common chassis ground.
LIFTGATE
POWER UNIT
175 AMP
FUSED CABLE
175 AMP
FUSED CABLE
TRUCK BATTERIES,
TYPICAL LOCATION
175 AMP
FUSED CABLE
OPTIONAL
BATTERY BOX,
TYPICAL LOCATION
To Next Page
Loading...
Need help?
General
