Maytronics M600 - Figure 19: Removing the Tracks (Steps a and B); Figure 20: Dismantling the Drive System (Step A)

M600 Disassembly Instructions
13
10.
Remove the tracks from both sides of the robot:
Figure 19: Removing the tracks (steps a and b)
11.
Dismantle the driving system as follows:
c.
Using a flat screwdriver, gently press on the clip and pull the wheel cover off at
the same time, from both sides of the robot, as shown below.
Figure 20: Dismantling the drive system (step a)