Maytronics M600 - Figure 29: Dismantling the Rear Brush (Step A); Figure 30: Dismantling the Rear Brush Parts (Step B)

M600 Disassembly Instructions
Disassembling the M600 18
14.
Dismantle the Rear Brush as follows:
a.
Remove the main body with two hands, one each side, push out the rear brush.
Figure 29: Dismantling the rear brush (step a)
b.
Dismantle the rear brush parts according to the numbered steps indicated below.
Figure 30: Dismantling the rear brush parts (step b)