Transmission/Transaxle G66M-R
Select Cable Adjustment
1. Make sure that the shift lever (transaxle side) is in neutral.
2. Unlock the lock piece of the select cable (shift lever side) in the order as shown in the
figure.
M6FL_05027
1 Safety lock 2 Lock piece
3. Shift the shift lever to neutral.
4. Lock the lock piece of the selector cable (shift cable side) in the order as shown in the
figure.
M6FL_05028
1 Safety lock 2 Lock piece
5. Shift the shift lever from neutral to other position, and make sure that there are no other
components in that area to interfere with the lever.
Service Training Mazda6 Facelift 05-19
To Next Page
Loading...
