Transmission/Transaxle A26M-R
Synchronizer Clutch Hub
• A ball-type detent mechanism is used in each clutch hub to reduce the overall
dimensions of the hub.
• The ball-type detent mechanism consists of a coil-type synchronizer key spring,
synchronizer key, and ball. Its function is essentially the same as the radial-type spring
found in other transaxles.
M6FL_05023
1 Synchronizer ring 5 Ball
2 Middle ring 6 Synchronizer key
3 Inner ring 7 Spring
4 Hub sleeve 8 Clutch hub
Service Training Mazda6 Facelift 05-27
To Next Page
