Accessories Body & Accessories
Advanced Keyless Engine Start Structural View
M6FL_09016
1 ID verification Not OK
7 Steering lock unit
2 Keyless warning light (red) (flash) 8 Transmitter (card key)
3 ID verification OK 9 Keyless antenna
4 Keyless indicator light (green)
(illuminated)
10 Reception range (interior)
5 Keyless receiver 11 4SD
6 Keyless control module 12 5HB, WGN
Operation in detail:
a) The start knob is pressed.
b) The request signal is sent by wire to the keyless control module.
c) The keyless control module sends a signal through the antenna.
d) The antenna sends a signal to the card key.
e) The card key sends its ID to the keyless receiver.
f) The keyless receiver forwards the ID to the keyless control module.
The keyless control module checks the ID.
g) If the ID is valid, the keyless control module sends a signal to the steering lock unit to
unlock the steering lock.
09-28 Service Training Mazda6 Facelift
To Next Page
