EasyManua.ls Logo

MBRAUN SPS-System - Equipment for Vacuum Pump (Optional); Power Connection Vacuum Pump

MBRAUN SPS-System
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Installation and Commissioning of the SPS Working Station
Page 3–8 Operating Manual MB-SPS-System
©
GmbH – Version 4.3 - 06/2010
3.2.5 Equipment for Vacuum Pump (optional)
The vacuum pump is only an optional equipment and not part of delivery. The standard vacuum
pump is chemical resistant, but only conditional explosion protected (See chapter 11).
!
Note!
Refer to the safety concept in chapter 2.2 and to chapter 3.3.1!
!
Note!
Dependend on the specific solvent in your system, an
- protected
vacuum pump can be mandatory. Please, contact the service of MBraun.
3.2.5.1 Power Connection Vacuum Pump
DANGER
Hazardous electrical voltage!
► Use country-specific power connection, see type plate and manual
of vacuum pump
► Care for the safety concept (see chapter 2.2 and 3.3.1)
Voltage
1 Phase – 220–240 V 1 Phase – 110 – 120 V
Frequency
50 – 60 Hz 50 – 60 Hz
Power
150W 150W

Table of Contents