1. General Information
Page 1–2 Operating Manual MB-SPS Systems
©
GmbH – Version 4.3 - 06/2010
1.1 General Information
The manufacturer M. Braun Inertgas-Systeme GmbH reserves the right for technical and optical
modifications as well as functional modifications on the systems or system’s components described
therein.
Any duplication of this documentation, even in form of excerpts, is only permitted after having
obtained the manufacturer’s information and concession.
Title: ..............................................................................MBRAUN SPS- Solvent Purification Systems
SPS Compact and SPS 800 Manual • Standard Operating Manual
Edition: ............................................................................................. Version 4.3 - 06/2010 (Original)
See type plate for details
Copyright: ................................................ © 2010 M. Braun Inertgas-Systeme GmbH (MBRAUN)
1.2 Entries Referring to the System
We guarantee the equipment as stated in the order/contract.
This documentation is part of the system:
Designation / Type: .........................................................................................
Serial number (s): .........................................................................................
Person(s) in charge .........................................................................................
of the system:
Space left for notes on system settings, instructions for maintenance etc.
System delivered with vacuum pump: ..…………………………………………………………………..
The delivered system is considered as complete machinery according to Machinery Directive
2006/42/EC or is conform with the Low Voltage Directive 2006/95/EG (See added CE-Declaration).
……………………………………………………………………………………………………….….…….…
……………………………………………………………………………………………………………………
System delivered without pump: ………………………………………………………………………...…
The delivered System is in conformity with the Directive 2001/95/EC on general product safety.
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
The declarations mentioned before, are each applied with a complete Standard System (see
chapter 1.3.). If parts of the system are not ordered with the delivery contract or modifications are
made by the customer, it is the responsibility of the customer to care for analogue configuration and
employment and to keep all safety regulations and the Machinery Directive 2006/42/EC (see
chapter 1.4).
.............................................................................................................................................................
.............................................................................................................................................................
.............................................................................................................................................................
.............................................................................................................................................................
.............................................................................................................................................................
.............................................................................................................................................................
To Next Page
Loading...
