MBRAUN SPS-System - Vakuumpumpe; Solvent Reservoir; Purging Hose; Sampling Container (Optional)

5. System Description and Operating: Solvent Reservoir and Sampling Flask
Operating Manual MB-SPS-Systems
©
GmbH – Version 4.3 – 06/2010
Page 5–3
5.1.2 Sampling Container (Optional)
Sampling Bulb
Teflon connection between outlet and bulb
Bulb for sampling solvents
Height adjustable scissors lift
(recommended for SPS Compact)
Sampling Flask 250 ml
with Schliff-Fitting Connection
Operating see chapter 5.3
5.1.3 Purging Hose
Purging Hose
with adapter
(recommended for inertising the solvent reservoirs)
5.1.4 Vakuumpumpe
The vacuum pump is only an optional equipment and not part of delivery. The optional vacuum
pump is chemical resistant, but only conditional explosion protected (See chapter 2.2, Safety
Concept).
The vacuum pump has to be installed at least 2m from the sampling point, solvent reservoirs and
collecting vessels.
The vacuum pump is a Third-Party-Component.
Please refer to the operating manual of the manufacturer.