5. System Description and Operating: Solvent Reservoir and Sampling Flask
Operating Manual MB-SPS-Systems
©
GmbH – Version 4.3 – 06/2010
Page 5–19
5.3.3 Taking Solvent out of the Sampling Flask
Using a syringe and the opening with the septum plug
samples can be drawn out of the glass flask, without
contamination of the solvent by the ambient atmosphere.
Prior to using the flask connect the septum plug to the
exhaust port and tighten the nut with the septum hand
tight. The septum should not be bended. The Solvent can
be drawn into the syringe using a hypodermic needle with
a length of at least 100 mm. After the syringe has been
filled with solvent it is withdrawn from the flask and the
solvent in the syringe can be used for the customer
application.
To Next Page
Loading...
