MBRAUN SPS-System - Modifications; Transport

1. General Information
Page 1–4 Operating Manual MB-SPS Systems
©
GmbH – Version 4.3 - 06/2010
 Improper use of the system;
 Insufficient maintenance of the system;
 Inappropriate operation of the system;
 Negligence of correct supply requirements;
 Application of third-part components to the system without prior consent of the manufacturer;
 Alteration of program or configuration write-ups without manufacturer’s consent.
!
NOTE!
Warranty applies to a single unit and multi-unit system types.
1.6 Modifications
WARNING
Danger of injury and damage!
► Changes and/or modifications of any kind to MBRAUN systems should
be made by MBRAUN technicians only.
Exceptions can be made with prior written confirmation from MBRAUN
► Any unauthorised change or modification to the system will cause the
warranty to expire.
1.7 Transport
Preparations for transporting an MBRAUN system should be carried out by an MBRAUN technician
only. The transport of the system or any part of a multi-unit system should be performed by a
forwarding agency offering specialized transportation services.
WARNING
Danger of injury and damage!
The system is extremely heavy and awkward, if not handled properly
tipping or overturning may occur.
► Use caution when transporting a system and ensure all parts are
securely fastened prior to relocation.
► The system must be handled carefully and must not be exposed to
shock. (Adhesive shock watch label on packaging)
Prior to installation and operation of the system, the Operating Instructions must be read and
observed. Contact the MBRAUN Service Department with any questions.