4. System Description Working Station
Page 4–4 Operating Manual MB SPS Systems
©
GmbH – Version 4.3 – 06/2010
4.2.2 SPS 800 Manual
The working station of the SPS 800 is designed for dispensing up to five solvents. The solvent
purification filter columns are connected to the working station. The solvent reservoirs are external
connected to the filter columns in the working station and are enclosed in the safety cabinet.
Left side wall:
Media connections
(Refer to chapter 3: Installation)
Top left side of front:
Pressure indication of primary pressure (top) for the
working gas (ca. 4- 6 bar) and pressure of the vacuum
line.
On the top of the SPS: Connection
for direct inlet of solvents to a
Glovebox (optional).
Safety Cabinet for placing solvent
purification filter columns.
Five external dispensing lines for
solvents. Each solvent line has its
colour code and is labelled with the
name of the intended solvent.
Each line is equipped with a
pressure reducing valve for adjusting
the solvent flow and a pressure
reading.
The support rod can be used for
fixing the laboratory flasks used for
receiving solvents.
Safety Cabinet for placing
solvent reservoirs.
uum Pump
To Next Page
