1
1 Machine Description
1.1 Intended Usage
1.1.1 Allowed Uses
The SR460/620/820 flexwing group of rotary mowers were developed for farmers or large-scale contractors
and are popular with aviation authorities. They are versatile machines that can be used for cutting set-aside,
stubble and pasture.
The SR460/620/820 flexwing group of rotary mowers are designed for use on level, undulating or inclined
ground and for a duty cycle of 1000 hours per annum. They will cut vegetation up to 100mm/4” thickness.
They can be mounted to agricultural tractors with a minimum of 70hp (SR460), 90hp (SR620) and 150hp
(SR820).
1.1.2 Improper Uses
DANGER! McConnel Limited declines any and all liability for damages caused by the machine to
persons, animals or property, resulting from use in any other way than described in this manual, or due
to damage caused by negligence or by not observing the instructions contained in this manual.
The machine, due to its typical construction, may also be suitable for uses other than from those foreseen by
the manufacturer. For this reason McConnel has selected, as non-exhaustive examples, a series of improper
uses that can be reasonably foreseen, which are:
Using the machine for hedge cutting.
Using the machine for amenity mowing purposes.
The uses listed above and those not specifically indicated in this manual, including reasonably foreseeable
improper uses, are definitively prohibited.
Figure 1.1 SR Series Trailed Flex Wing Mower
(SR460 model illustrated)
To Next Page
Loading...