21
2.3.7.3 CAUTION! When the machine is not in use, ensure that the wing locking pins or retention strap
(depending on model of machine) is fitted to ensure that the wings don’t suddenly drop and
potentially crush personnel, bystanders in the event of a mechanical or hydraulic failure.
2.3.7.4 CAUTION! When the machine is not in use and not connected to a tractor, use the machine
chocks in order to ensure the machine is secure and will not move.
IMPORTANT: Store the machine in a safe place which is protected from the elements, to
ensure its wellbeing and protection from damage to components for when the machine is to be
recommissioned and used again.
2.4 Safe Maintenance
2.4.1.1 WARNING! It is mandatory to switch the combustion engine off and disengage PTO, lower the
machine, ensure that the machine has completely stopped, remove the ignition key from the
dashboard of the tractor and engage the parking brake before leaving the driver’s seat and
engaging in maintenance operations.
2.4.1.2 DANGER! Disconnect the PTO shaft connecting the gearbox of the machine to the tractor PTO
before starting any maintenance or adjustment.
2.4.1.3 WARNING! It is mandatory for the machine to be lifted adequately and with suitable lifting
accessories and harness in the positions as stated in Section 3.1 and according to the
regulations in force in the country where these operations take place along with the
recommendations of McConnel.
2.4.1.4 IMPORTANT: Maintenance on the machine should be performed by only skilled and
specialized personnel, in strict compliance with the instructions in this manual, and any worn or
damaged parts should be replaced.
2.4.1.5 IMPORTANT: Always use genuine McConnel parts when carrying out repairs and
maintenance with thoughts to longevity and reliability of the machine and personnel safety.
2.4.1.6 IMPORTANT: Store the machine in a safe place which is protected from the elements, when
the work is completed to ensure its wellbeing and protection from damage to components.
2.4.1.7 DANGER! When required to work on the machine with the wings raised, ensure that the wing
locking pins or retention strap (depending on model of machine) is fitted correctly to ensure that
the wings don’t suddenly drop and potentially crush maintenance personnel in the event of a
mechanical or hydraulic failure, especially when working on the underside of the machine.
2.4.1.8 CAUTION! Relieve hydraulic pressure before disconnecting lines or working on the system.
This can be done by pushing and pulling/pushing the selected tractor lever/button. Only once
this has been completed and then suitable safety glasses and impenetrable gloves have been
put on can the hydraulic hoses be removed from the tractor.
2.4.1.9 CAUTION! When working with/checking the hydraulic system on the machine always wear
safety glasses and impenetrable gloves. This also applies when working with gearboxes and
gearbox oil. Use paper or cardboard to search for leaks and not hands or any other body parts.
2.4.1.10 CAUTION! Keep hands and body away from pin holes and nozzles ejecting hydraulic fluid.
Ingested or penetrated hydraulic fluid in the body can become gangrenous. Removal must be
carried out by a medical professional.
2.4.1.11 CAUTION! Ensure all hydraulic hoses, lines and connections in good condition and tight before
applying pressure.
2.4.1.12 IMPORTANT: Do not change any factory-set hydraulic settings to avoid component or
equipment failures.
2.4.1.13 IMPORTANT: Do not modify or alter implement functions or components.
To Next Page
Loading...
