32
Figure 3.2
SR460/620
Figure 3.3
SR820
3.2 Post-delivery/First Use Inspection
3.2.1 Tractor Inspection
It is important to read the tractor manufacturer’s operators manual to ensure that a complete inspection to the
manufacturer’s recommendations is carried out on the tractor ensuring it is in correct working condition and has
the correct safety measures in place for use. It is important before use to check the suitability of the tractor using
the manufacturer’s manual to ensure it meets the requirements to fit and operate correctly with the machine.
3.2.2 Machine Adjustment
The machine when received from McConnel is virtually complete and components are set correctly, requiring
minimum time to ready the machine for use. McConnel machines are tested after manufacture.
It is important to assess the machine to ensure that it is of the correct specification ordered from McConnel or
local McConnel dealer. Information with regards to the specification of the machine can be found on the
machines serial plate. Guidance to the location of the serial plate can be found in Section 1.3.
Before use it is important to inspect the machine following the guidance in this operators manual to ensure it is
correctly set-up and is suitable for the attaching tractor using the inspection guidance sheet in Section 5.10.
To Next Page
Loading...