EasyManua.ls Logo

MCCOY KT5500 - Page 5

Default Icon
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80-0420-23 POWER TONG
Manual № TM12012
Preamble
Page v
©2008-2017 McCoy Global
Copyright © 2012 - 2015 McCoy Global, including its wholly owned subsidiaries, (“McCoy”), all rights reserved. This document is
the property of McCoy and is supplied as reference information for users of our products. This document and the contents within
are considered condential information, not to be disclosed, copied, transmitted, transcribed in any form, or stored on any type
of data storage media without the express written consent of McCoy.
McCoy has made every effort to ensure the information contained in this document is accurate and current. This manual is
intended to provide equipment operation and safety instructions for your equipment. However, McCoy does not warrant or
guarantee that the information is either complete or accurate in every respect and the user of the manual should consult with its
McCoy sales representative for any clarications and updates.
The user of the manual shall protect, indemnify, and hold harmless McCoy and its directors, ofcers, employees, and agents
from and against all liability for personal injury, death, or property damage resulting directly or indirectly from the use of the
information contained in this manual.
Observance of all descriptions, information and instructions set out in this manual is the full responsibility of the user. This
manual is intended for guidance and informational purposes and must be used in association with adequate training and on-the-
job supervision to provide safe and effective equipment use.
It is the responsibility of the user to conform to all regulations and requirements issued by an authority or agency which may
affect the operation, safety or equipment integrity, that may overrule the content of this documentation.
The user will acknowledge and obey any general legal or other mandatory regulation in force relating to accident prevention,
safety, and equipment integrity.

Table of Contents