3
ground for the lead-in wire to an antenna dis-
charge unit, and size of ground conductors, loca-
tion of antenna-discharge unit, connection to
ground electrode. For ground wire:
A. Use No. 10 AWG (5.3 mm
2
) copper No. 8
AWG (8.4 mm
2
) aluminum, No. 17 AWG
(1.0 mm
2
) copper-clad steel, bronze, or
larger as ground wire.
B. Secure antenna lead-in and ground wires to
the house with stand-off insulators spaced
from 4 feet (1.2 meters) to 6 feet (1.83
meters) apart.
C. Mount antenna discharge unit as closely as
possible to where lead-in enters house.
D. Use jumper wire not smaller than No. 6
AWG (13.3 mm
2
) copper or equivalent
when separate antenna grounding elec-
trode is used.
Customer Service
Technical Assistance
Please Take A Moment
Thank You
Copyright 2003 by McIntosh Laboratory, Inc.
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Your decision to own this McIntosh MHT200 A/V System
Controller ranks you at the very top among discriminating
music listeners. You now have “The Best.” The McIntosh
dedication to “Quality,” is assurance that you will receive
many years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Serial Number:
Purchase Date:
Dealer Name:
If it is determined that your McIntosh product is in need of
repair, you can return it to your Dealer. You can also return
it to the McIntosh Laboratory Service Department. For as-
sistance on factory repair return procedure, contact the
McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your Dealer wish addi-
tional help concerning a suspected problem, you can re-
ceive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636
www.eskonline.nl
To Next Page
Loading...
Need help?
General
