48
When the MHT200 has the optional TM1 AM/FM Tuner
Module installed, the On-Screen Display will indicate the
Frequency and Preset Label. Press the Front Panel TRIM/
TUNE Push-buttons or the REVIEW Push-button on the
Remote Control and the Preset Label will appear on the
bottom of the On-Screen Display. The Frequency of the
Station will appear when using the Channel Up and Down
Push-buttons. The On-Screen Display will also indicate the
TRIM MODE adjustments of either the Channel Levels or
Tone settings. Refer to figure 46 on the previous page and
figure 47.
Figure 47
Center 3dB
Trim Mode
Adjustment
Trim Mode
Level
www.eskonline.nl
To Next Page
Loading...
