mectron COMPACT PIEZO LED - Identification Data; Device Identification Label

6
COMPACT PIEZO LED
Symbol Description Symbol Description
Rx Only
ForUSmarket,only.
CAUTION:U.S.Federal
law restricts this device
to sale by or on the
order of a licensed
dentistand/ordental
hygenist.
Table1 – Symbol
 a) The symbol is represented by a yellow warning
triangle and a black graphical symbol.
2 IDENTIFICATIONDATA
A correct description of the model and of the
serial number of the device will allow the After
Sales Service to provide fast and eective
answers.
Always provide this information every time
that you contact Piezosurgery Inc. After Sales
Service.
2.1 DeviceIdenticationLabel
Each device is equipped with an
identication label indicating the main
technical characteristics and the serial
number. The ID label is located on the
side of the compact piezo LED module.
Thecompletetechnicalspecicationsare
provided in Chapter6onpage24 .
NOTE: The complete list of symbols is
provided in Capitolo 1.5 a pagina 5 .
COMPACT PIEZO LED
108000000
made in Italy
manufacturer
Mectron S.p.A.
Via Loreto 15/a
16042 Carasco -GE- Italy
0051
04000091 YYYY-MM-DD
24V 50/60 Hz / 32V Min. 40 VA
Bar Code HIBC 128
Additional symbols and characteristics
of the device are provided on a separate
label. This ID label is located on the side
of the compact piezo LED module.
NOTE: The complete list of symbols is
provided in Capitolo 1.5 a pagina 5 .
Protect with Fuse T 2AL, 250V
Use only with adapters or similar as indicated in
the instruction manual.
Device for intermittent operation:
60 s ON - 30 s OFF with irrigation
30 s ON - 120 s OFF without irrigation
COMPACT PIEZO LED