Medeli MD500 User Manual

Press or
[FUNCTION-/BACK] button to enter or
escape the menu of function. The default
option of the menu is TRANSPOSE .
Press [FUNCTION+/NEXT] or
[FUNCTION-/BACK] button, select your
desired option. Use [+/YES]/[-/NO] or
the DIAL to set the parameter.
The option and the parameters are as
follows:
[FUNCTION+/NEXT]
Option LCD Display Range Default
TRANSPOSE XXX Transpos -12 12 0
TUNE XXX Tune -50 50 0
OCTAVE XXX Octave -2 (4Octave 0
BEAT XXX Beat 0,2 4
SPLIT POINT XXX Split P
t
61(C2... C7) 19(#F3)
PEDAL ASSIGN 00X Ped Sust Soft St/S Mem Sust
TOUCH
XXX Touch 1-3,off 2
BRILLIANCE
XXX Brillian 0 -127 96
REVERB TYPE
00X Rev Type 0
-
7 4
REVERB LEVEL XXX Rev Lev 0 -127 60
CHORUS TYPE 00X CHo Type 0
-
7 0
CHORUS LEVEL XXX Cho Lev 0 127 0
MIDI RECEIVE
XXX Receive 01 16
ALL
ALL
MIDI TRANSMIT XXX Transmit 01 16 01
If you do not press any button for 5
seconds after entering FUNCTION menu,
it will quit this menu automatically.
Note:
- /NO
+ / YES
Function Menu
Transpose
Tune
The LCD displays the transpose value.
Use [+/YES]/[-/NO] or DIAL to change the
transpose value. Its range is from 12 to
12 semitones.
Press [+/YES] and [-/NO] together will set
the TRANSPOSE value to its default one.
The LCD displays the tune value. Use
[+/YES]/[-/NO] or DIAL to change the tune
value. Its range is from 50 to 50 cents
only by the right area of keyboard.
Press [+/YES] and [-/NO] together will
set the TUNE value to its default one.
15
You can change the key of the entire
keyboard with TRANSPOSE function by
adjusting the pitch in semitone steps.

Medeli MD500 Specifications

General

Brand	Medeli
Model	MD500
Category	Synthesizer
Language	English