Medeli MD500 User Manual

This function allows you to change the tonality
of the sound. The LCD displays XXX
Brillian , Use [+/YES]/[-/NO] or DIAL to
change the Brilliance value range from 0 to 127.
The default value is 96. Be note that the
volume level will increase/decrease slightly
when changing the value.
Brilliance
Function Menu
This function allows you to adjust the dynamic
level when playing the keyboard. The LCD
displays the touch value. Use [+/YES]/[-/NO]
or DIAL to change the touch response level.
There are 4 levels touch response including a
off parameter.
If the touch is set as off , it means no touch
response to keyboard. To experience the effect,
play any note on the keyboard when you are
adjusting the levels.
Touch
You can experience the effect like an instrument
to be played in a room or a concert hall.
The LCD displays the reverb type. Use
[+/YES]/[-/NO] or DIAL to change the reverb
type.
There are 8 types can be selected (0~7). The
default type is 4.
The LCD displays the reverb level. Use [+/YES]
/[-/NO] or DIAL to change the reverb level.
The level ranges from 0 to 127. The default level
is 60.
This function allows you to make the sound
warmer and thicker.
The LCD displays the chorus type. Use [+/YES]
/[-/NO] or DIAL to change the chorus type.
There are 8 types can be selected (0~7). The
default type is 0.
Reverb type
Reverb level
Chorus type
1617

Medeli MD500 Specifications

General

Brand	Medeli
Model	MD500
Category	Synthesizer
Language	English