12
RESET – factory settings
Use Reset to restore all device settings to the factory
settings. Codes that have been programmed in, learn
functions and macros are therefore deleted.
1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
until CODE SETUP appears.
2. Press S again briefly to open
SYSTEM SETUP.
3. Confirm with OK. The
VOL/
MUTE SETUP
is displayed.
4. Use the arrows (press four
times) to select
SYSTEM RESET
and confirm with OK.
5. The message
CONFIRM RESET
is displayed.
Confirm with OK
to reset the settings.
6. While the factory settings are
being restored,
PLEASE WAIT
appears in the display.
Univ-FB_MD 81302_UK.fm Seite 12 Montag, 7. August 2006 11:08 11
To Next Page
Loading...
