17
When all codes for the selected
device type are shown, the
following message appears:
SEARCH END.
Code searching by brand name
This function gives you the option of searching by brand
name. You can find the brand name in the code list under
"Code Search by Brand Name".
1. Switch on the device to be controlled.
2. Keep the S (Setup) key
pressed down for approx. 3
seconds, until
CODE SETUP
appears.
3. Press OK.
LIST CODES now
appears in the display.
4. Use the arrows (press
three times) to select the
BRAND CODES menu.
5. Press OK. The
MODE KEY
display appears.
6. Press the required mode key
(TV, VCR, DVD, CD, ASAT,
CBL, AUX, DSAT). The
DEVICE TV display appears.
7. Use the arrows to select the device type to be
programmed on this mode key. (If you select "
TV" it is
not possible to select a device type, because only TV
codes can be programmed on the TV mode key.)
Please refer to the list and table Page 13.
8. Press OK. The
BRAND KEY?
query appears.
9. Press a number key
for a required manufacturer
according to the following overview:
Key 1 = Medion, Tchibo
Key 2 = Philips, Radiola, Philco, Erres, Pye
Key 3 = Sony, Akai, Panasonic, JVC, Sharp, Toshiba,
Daewoo
Key 4 = Thomson, Brandt, Fergusson
Key 5 = Saba, Nordmende, Telefunken
Key 6 = Grundig, Blaupunkt
Key 0 = all brands.
10. Press OK. The
SEARCH KEY?
display appears.
11. Perform the function test now
by pressing the PROG+, or
PLAY keys (VCR only) until the
device changes channel,
switches off or responds accordingly.
Univ-FB_MD 81302_UK.fm Seite 17 Montag, 7. August 2006 11:08 11
To Next Page
Loading...
Need help?
General
