PCF Pro User Manual
DOC01851 Page 37 of 74
Baskets
The PCF Pro has three baskets, which are
used to house DIN baskets. Easily placed into
and removed from the machine, the baskets
are held in racks on three levels and dock onto
water supply spigots at the rear of the rack. To
prevent the baskets moving during operation
they are locked into position with securing
flags.
Basket Removal
To remove the basket push the thumb ball up
on both sides of the rack. The flags will drop
down allowing the basket to be pulled out of
the rack.
Pull the basket away from the machine, and tilt
down to ensuring any retianed water drips into
the tank.
Basket Insertion
To insert the basket, place it on the white
guide rails and push it back
ENSURE the basket docks onto the irrigation
spigots
To Next Page
Loading...
