EasyManua.ls Logo

Medisafe PCF Pro - PCF Pro Warranty Registration

Medisafe PCF Pro
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PCF Pro User Manual
DOC01851 Page 10 of 74
PCF Pro Warranty Registration
Important Note for the Installer
This Registration Form MUST be completed by the person undertaking installation and witnessed by
the owner of the product. In the event of a Warranty Claim, the information contained within this
Registration is your evidence that the product has been correctly installed. Failure to provide this
evidence in the event of a warranty claim may result in the claim being rejected (this does not affect
your statutory rights as a customer). A copy of this form must be sent to your local Medisafe
authorised distributor to validate the warranty.
Tests parts one and two must be completed by the engineer commissioning the PCF Pro for warranty
registration purposes. Where no value is required write pass or fail with a comment if necessary.
For installation instructions and contact information for qualified personnel who can perform the
installation, please contact Medisafe (see section 1-1).
Owner Name:
Installation Address:
Installation Date:
Model No:
Serial No:
Software Version:
Installed by:
Witnessed by:
Position:
Part 1, Test Type Acceptable Value Result Comments
Drains remove effluent effectively
-
Phase sequence, Pump Rotation
-
Support bases secure
-
There is no evidence of
interference to or from other
equipment connected to the
same services
-
Emergency stop operates and
halts carrier lifting system
-
For all 5 sections test Safety
Edge activation during downward
motion halts lifting system then
raises up by approximately 30mm
-

Table of Contents

Related product manuals